News

Latest News

12

2021

-

11

Analysis of Key Components of Motor Bearing Grease


Do you know enough about motor bearing grease? In this article, we will dive into the key components of motor bearing grease to help you better understand its importance and how it works. Let's solve this mystery together!

Motor bearing grease is a lubricant specifically used to lubricate motor bearings. It can reduce friction and wear, extend the service life of the bearing, and improve the efficiency and performance of the motor. The performance of motor bearing grease mainly depends on its key components. Below, we will analyze these components one by one.

1. Base oil: Base oil is the main component of motor bearing grease, accounting for most of the proportion. It can provide lubrication effect and store heat energy to maintain stable lubrication performance under high temperature conditions. Common base oils are mineral oil and synthetic oil, of which synthetic oil performs better in high and low temperature environments.

2. Thickener: The thickener is to increase the viscosity and viscosity of the grease, so that it can always be kept in the correct position when the bearing is running, and prevent leakage and loss. Common thickeners include lithium-based thickeners, polyurethane thickeners, etc.

3. Antioxidants: The role of antioxidants is to prevent grease from being oxidized and degraded during long-term use, and to maintain the stability and durability of its performance. Antioxidants can effectively extend the service life of grease and improve the reliability of motor bearings.

4. Extreme pressure additive: The motor will bear greater load and pressure during operation, so it is necessary to use extreme pressure additive to provide better lubrication protection. These additives can form a lubricating film under high pressure, reduce friction and wear, and prevent contact of bearing surfaces.

In addition to the above key ingredients, motor bearing greases may also contain other auxiliary ingredients, such as preservatives, water-resistant agents, defoamers, etc., to meet the needs of specific application environments.

In general, the key components of the motor bearing grease work together to ensure the normal operation and service life of the motor bearing. Choosing the right grease can greatly improve the efficiency of the motor, reduce maintenance costs, and reduce the risk of failure.

When using motor bearing grease, it is necessary to make a reasonable selection according to the working conditions, temperature, load and other factors of the motor, and regularly check and replace the grease to ensure the normal operation of the motor.